SMART-O Replenishment Box of 16 x R6BP1 Sump Plugs

My Store

SMART-O Replenishment Box of 16 x R6BP1 Sump Plugs

1. Confirm fitmentCheck SKU, thread size or use the parts finder.
2. Install onceSMART-O® replaces the standard drain plug.
3. Service smarterReuse the plug and replace the washer at each oil change.
Part / SKUR6BP1-SB-16
Thread sizeConfirm before ordering
Pack quantitySee product options
Fitment noteUse fitment support if unsure
$111.80

Costs around one coffee per service. Designed to help prevent leaks, stripped oil pan threads and comeback jobs.

Fitment matters. Check vehicle/thread details before dispatch if unsure. Check fitment before adding →
Quantity

Not sure it fits? Send vehicle details before we ship.

Authorised US supplyGenuine SMART-O® stock from the authorised US supplier.
Fitment supportConfirm before dispatch if unsure.
Wrong plug?Contact us before installation; unused stock may be exchanged where possible.
Ships from the USCurrent stock and product guidance.
SMART-O Replenishment Box of 16 x R6BP1 Sump Plugs $111.80

Replenishment Box contains 16 Blister Packs \nWeight & Dimensions: M14 x 1.5mm \nBarcode:  9355733000249

Genuine SMART-O® stock from the authorised US supplier
Fitment support before dispatch if unsure
17× harder to loosen than OEM — Oakland University tested

What you’re buying

Protection, not just a plug.

SMART-O® drain plugPatented face-sealing plug matched to your vehicle.
Oil-reactive O-ringDesigned to expand slightly on contact with engine oil and support seal integrity.
Installation confidenceUse the torque guidance and fitment checks before service.
Replenishment Box contains 16 Blister Packs \nWeight & Dimensions: M14 x 1.5mm \nBarcode:  9355733000249

1. Remove the old drain plug. Clean the oil pan thread and face area with a clean cloth.

2. Inspect the SMART-O® O-ring. Ensure the O-ring is seated correctly in the groove. Do not apply thread sealant or PTFE tape.

3. Thread by hand first. Always start threading by hand to avoid cross-threading. Thread until the plug head contacts the oil pan face.

4. Tighten with SmarTorq™. Petrol engines: 24.4 Nm (18 ft-lb). Diesel engines: 40.6 Nm (30 ft-lb). Do not exceed these torque values.

5. Check after first run. After the first run, inspect for leaks. The O-ring expands slightly in contact with engine oil to support seal integrity.

Use the fitment check as a starting point, then confirm thread size before ordering if anything is unclear.